The REVOLOOP.mtb ultra is up to the challenge of steep climbs and was designed by us for lightweight construction, which is reflected in a product weight of only 45 grams at 29 inches. Due to its low weight, it saves about 100 grams per wheel, which makes starting and climbing less strenuous. The material formulation specially developed for this tube combines a very high mechanical strength with simultaneous elasticity of the material and thus enables the innovative, specific property profile of this bicycle tube.
The valve is made of particularly impact- and break-resistant thermoplastic and is ahead of its time. Minimum weight coupled with maximum performance. A specially designed valve foot prevents damage to the hose due to sharp edges on the valve bore. The tough plastic minimizes valve breakage during the toughest trails with low air pressure.
IMPORTANT: Please never fill your REVOLOOP hose outside of the jacket with pressure above 0.5 bar. Otherwise, there is a risk that the REVOLOOPs will locally overstretch or even burst. Both scenarios lead to the fact that the hose is subsequently unusable because the overstretching of the hose does not deform back and the hose can therefore no longer be fitted. Therefore: REVOLOOP hoses only apply a pressure of more than 0.5 bar when they are fully assembled.
ETRTO42-60/ 622 29 x 1,6-2,4 Presta 40
ETRTO42-60/ 584 27,5 x 1,6-2,4 Presta 40
ETRTO42-60/ 559 26 x 1,6-2,4 Presta 40